Congratulations on the official launch and operation of our company's website

Renqiu Haihua Machinery Parts Co., Ltd. is a private enterprise specializing in the production of cone sets. Our company specializes in the production of mechanical transmission accessories: cone sleeve, pulley cone sleeve, cone sleeve pulley products.

How to extend the service life of sprockets and improve measures

The service life of sprockets is relatively short, far from meeting the requirements of production practice. Based on the usage status, processing status, and manufacturing technology of sprockets, some improvement measures have been proposed for sprockets:

How to maintain and upkeep the sprocket

The tightness of the sprocket should be appropriate, as being too tight will increase power consumption and make the bearings prone to wear; Chain wheels that are too loose are prone to jumping and slipping. The tightness of the sprocket is about 2% -3% of the center distance between the two sprockets when lifted or pressed down from the middle of the sprocket.

Reasons for chain wheel wear

The larger the adhesive wear load, the higher the surface temperature, and the more severe the adhesive phenomenon. For metal materials with a certain hardness, a wear rate pressure relationship curve was obtained by conducting wear tests at different pressures. When the pressure reaches more than one-third of the material's hardness, severe wear will occur. According to the stress distribution diagram, it can be seen that the maximum stress contact point is the point of maximum pressure, with a value of 884.4 MPa. Due to the quenching hardness of HRC48~52 at the chain socket, its corresponding hardness value is 4800MPa. Therefore, the pressure is far less than one-third of the material hardness, so adhesive wear is not the main form of sprocket wear.